완전 자동 더블 헤드 터미널 프레스 (QW-2300+2wp)

장치 기능:

1. This machine can simultaneously terminal both ends with waterproof plugs inserted at both ends. Alternatively, it can terminal neither end simultaneously (즉., wire cutting function), or terminal only one end at both front and rear ends with waterproof plugs inserted at only one end. It is universally applicable for both horizontal and vertical molds.

제품 사양:

1. 전원 공급 장치: AC110V/50HZ single-phase.
2. 생산능력: up to 300mm in length, 2000-2500 시간당 조각, 재료에 따라.
3. 처리 범위: 14AWG to 28AWG.
4. 절단 길이: 15-9999mm.
5. 필링 길이: 0.1-6 mm 앞쪽 끝, 0.1-18 mm 뒤쪽 끝, 그리고 최대 10 부분 박리의 경우 mm.
6. 절단 정밀도: 0.2±02*L (길이)
7. 공기압: 5-6 kg.

기계 구성:

1. 기계는 다음을 사용합니다. 9 sets of Mitsubishi servo motors from Japan, with linear motion at both ends. 스테퍼 모터 2세트 (the motors for the final step of wire extraction and wire placement) are also utilized.
2. All pneumatic components, including cylinders, solenoid valves, and air pipes, are manufactured by Japan's SMC brand.
3. The guide rails are from Taiwan's Shangyin brand, while the speed reducers are from Japan's Shinboshi, and the sensors are from Japan's Omron and Kins.
4. The controller is controlled by industrial computer.
5. 완전 컴퓨터 수치 제어 (CNC) 커터 크기 디버깅용, 필링 길이, 그리고 끝 깊이.
6. The crimping machine is a 3-ton servo crimping machine, 에너지 효율성과 조용한 작동이 특징.
7. 압력 감지 SMC
8. Interface for the reserved pressure management device of the machine.
9. 와이어 이형기 납품, 포함 2 금형 세트.
10. Four-wheel alignment ensures precise length measurement.
11. The machine is equipped with reserved interfaces for inkjet printers.
12. The machine is equipped with built-in waterproof plug functionality. Replacing the waterproof plug only requires replacing the guide rail and pin, which is convenient and quick.